|
|
|
National Stock Number:
5365-01-062-3645
Federal Supply Class:
5365
National Item Identification Number:
010623645
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 120567-1 | 36452 | DRS TECHNOLOGIES CANADA LTD | | 120567-1 | 38200 | DRS TECHNOLOGIES CANADA LTD. |
|
Techincal Specification:
| APERTURE LENGTH | 5.540 INCHES NOMINAL | | APERTURE WIDTH | 2.740 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 2.760 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 5.560 INCHES NOMINAL | | HOLE DIAMETER | 0.201 INCHES NOMINAL | | INSIDE CORNER RADIUS | 0.380 INCHES NOMINAL | | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.100 INCHES NOMINAL | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.100 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.620 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.420 INCHES NOMINAL | | OVERALL LENGTH | 6.400 INCHES NOMINAL | | OVERALL WIDTH | 4.000 INCHES NOMINAL | | SPECIAL FEATURES | TWO HOLES 0.185 IN. DIA,COUNTERSINK 0.350 IN. DIA BY 82 DEG LOCATED 3.200 IN. FROM EDGE OF PLATE TO CENTER OF HOLE ALONG LG,3.200 IN. CENTER TO CENTER DISTANCE OF HOLES ALONG WIDTH |
|
|