|
|
|
National Stock Number:
5365-01-062-0187
Federal Supply Class:
5365
National Item Identification Number:
010620187
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 113B4070P1 | 89954 | BAE SYSTEMS CONTROLS INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 0.435 INCHES MINIMUM AND 0.445 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 4 | | HOLE DIAMETER | 0.168 INCHES MINIMUM AND 0.174 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM | | OVERALL THICKNESS | 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 | | SPECIAL FEATURES | MATERIAL IS QQ-S-766 CL 302 COND A FIN. NO. 2D. PASSIVATED FINISH NO. E300. | | STYLE DESIGNATOR | CIRCULAR | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|