|
|
|
National Stock Number:
5365-01-061-1616
Federal Supply Class:
5365
National Item Identification Number:
010611616
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 23-10-0125 | 96169 | ELECTRIC BOAT CORPORATION | | 501-4675661 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 501-4675661 ITE | 53711 | NAVAL SEA SYSTEMS COMMAND | | 501-4675661 ITEM 18 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 609-4676630 ITE | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 87643-6503 | 96169 | ELECTRIC BOAT CORPORATION | | 87643-6503 ITEM 18 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| APERTURE DIAMETER | 2.000 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 2.000 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.000 INCHES NOMINAL | | HOLE DIAMETER | 0.280 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 0.250 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.280 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.280 INCHES NOMINAL | | OVERALL LENGTH | 2.560 INCHES NOMINAL | | OVERALL WIDTH | 2.560 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281,CL A,COND A,FORM A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY 400 | | SLOT WIDTH | 0.750 INCHES NOMINAL | | SPECIAL FEATURES | SLOT ONE SIDE | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
|
|