|
|
|
National Stock Number:
5365-01-058-9954
Federal Supply Class:
5365
National Item Identification Number:
010589954
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 2006310-1 | 17576 | GOODRICH CORP DBA GOODRICH CORP | | 2006310-5 | 17576 | GOODRICH CORP DBA GOODRICH CORP | | 2006310-5 | 6K4C8 | GOODRICH CORPORATION | | 5365PL0838438 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.340 INCHES MINIMUM AND 0.360 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM | | CONSTRUCTION | LAMINATED | | CRITICALITY CODE JUSTIFICATION | FEAT | | HOLE DIAMETER | 0.260 INCHES MINIMUM AND 0.267 INCHES MAXIMUM | | LAMINATION QUANTITY | 15 | | LAMINATION THICKNESS | 0.003 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-22499,COMP 3,TYPE 1,CLASS 2 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | OVERALL LENGTH | 1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM | | OVERALL THICKNESS | 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM | | OVERALL WIDTH | 0.670 INCHES MINIMUM AND 0.730 INCHES MAXIMUM | | SPECIAL FEATURES | F-16 LANDING GEAR COMPONENT | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
|
|