|
|
|
National Stock Number:
5365-01-058-8303
Federal Supply Class:
5365
National Item Identification Number:
010588303
Description:
SPACER,RING
Detail:
A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE.
|
Manufacturer Information:
| 965135-338 | 59211 | PARKER-HANNIFIN CORPORATION | | 965135-338 | 82106 | PARKER-HANNIFIN CORPORATION | | 965135-338 | 93835 | PARKER-HANNIFIN CORP |
|
Techincal Specification:
| INSIDE DIAMETER | 0.562 INCHES MINIMUM AND 0.582 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059A MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 301 | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM-WASHER | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 0.715 INCHES MINIMUM AND 0.735 INCHES MAXIMUM | | OVERALL THICKNESS | 0.030 INCHES NOMINAL | | SURFACE TREATMENT | PASSIVATE |
|
|