|
|
|
National Stock Number:
5365-01-057-1365
Federal Supply Class:
5365
National Item Identification Number:
010571365
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 033137 | 77640 | ZF ACTIVE SAFETY AND ELECTRONICS US LLC | | 22RX153 | 45152 | OSHKOSH CORP |
|
Techincal Specification:
| APERTURE DIAMETER | 1.860 INCHES MINIMUM AND 1.880 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 4 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 1.068 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.376 INCHES MINIMUM AND 1.396 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM | | CONSTRUCTION | ONE-PIECE | | HOLE DIAMETER | 0.390 INCHES MINIMUM AND 0.405 INCHES MAXIMUM | | OUTSIDE CORNER RADIUS | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | OVERALL LENGTH | 2.720 INCHES MINIMUM AND 2.780 INCHES MAXIMUM | | OVERALL THICKNESS | 0.003 INCHES NOMINAL | | OVERALL WIDTH | 2.106 INCHES MINIMUM AND 2.166 INCHES MAXIMUM | | MATERIAL | STEEL | | SPECIAL FEATURES | SIDE RADIUS OF 2.302 IN. TO 2.322 IN. DIA ON CENTERLINE ALONG THE LG | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
|
|