5365-01-040-7729 SHIM Index 5365-01-040-7731 SPACER,RING

National Stock Number:
5365-01-040-7730

Federal Supply Class:
5365

National Item Identification Number:
010407730

Description:
SHIM

Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.


Manufacturer Information:
209-060-115-797499BELL TEXTRON INC


Techincal Specification:
BOLT HOLE QUANTITY2
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.500 INCHES NOMINAL
CONSTRUCTIONLAMINATED
FEATURES PROVIDEDSEPARABLE
HOLE DIAMETER0.370 INCHES NOMINAL
LAMINATION QUANTITY63
LAMINATION THICKNESS0.003 INCHES NOMINAL
OVERALL LENGTH2.380 INCHES NOMINAL
OVERALL WIDTH1.100 INCHES NOMINAL
SPECIAL FEATURESSLOT THROUGH LAMINATED SIDE ONLY,0.060 IN. MIN,0.080 IN. MAX W,0.095 IN. DEPTH,1.150 IN. FROM END


Click here to Register for Free 30-day Trial