|
|
|
National Stock Number:
5365-01-039-0338
Federal Supply Class:
5365
National Item Identification Number:
010390338
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 60457-1 | 08719 | DUCOMMUN LABARGE TECHNOLOGIES, INC | | 62-1052 | K7242 | ACAL ELECTRONICS LTD | | A60457-1 | 08719 | DUCOMMUN LABARGE TECHNOLOGIES, INC |
|
Techincal Specification:
| APERTURE WIDTH | 0.685 INCHES MINIMUM AND 0.690 INCHES MAXIMUM | | APERTURE LENGTH | 0.685 INCHES MINIMUM AND 0.690 INCHES MAXIMUM | | INSIDE CORNER RADIUS | 0.020 INCHES MINIMUM AND 0.025 INCHES MAXIMUM | | OVERALL LENGTH | 0.755 INCHES NOMINAL | | OVERALL WIDTH | 0.755 INCHES NOMINAL | | MATERIAL | ALUMINUM ALLOY 6063 | | STYLE DESIGNATOR | NON-CIRCULAR W/O BOLT HOLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE |
|
|