5365-01-038-5808, SPACER,PLATE

4720-01-038-5807 HOSE ASSEMBLY,NONMETALLIC

National Stock Number:
5365-01-038-5808

Federal Supply Class:
5365

National Item Identification Number:
010385808

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

32-511556-23	34087	KITCO LLC
32-511556-23	56540	ASSOCIATED AIRCRAFT MANUFACTURING & SALES, INC.
32-511556-23	76301	THE BOEING COMPANY
32-511556-23	8X044	DERCO AEROSPACE, INC.

Techincal Specification:

APERTURE LENGTH	2.310 INCHES MINIMUM AND 2.370 INCHES MAXIMUM
APERTURE WIDTH	2.150 INCHES MINIMUM AND 2.210 INCHES MAXIMUM
BOLT HOLE QUANTITY	10
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	0.800 INCHES MINIMUM AND 0.860 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM
HOLE DIAMETER	0.210 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
INSIDE CORNER RADIUS	0.160 INCHES NOMINAL
OUTSIDE CORNER RADIUS	0.500 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	1.690 INCHES MINIMUM AND 1.750 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
OVERALL LENGTH	7.520 INCHES MINIMUM AND 7.580 INCHES MAXIMUM
OVERALL THICKNESS	0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
OVERALL WIDTH	6.530 INCHES MINIMUM AND 6.590 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/14 T6 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 7178
SPECIAL FEATURES	14 HOLES TOTAL. 10 HOLES ARE .23 DIA, 2 HOLES ARE .50 DIA, AND 2 HOLES ARE .28 DIA. THE FRONT HAS A .69 RADUIS. THE OVERALL BODY IS 3.88 WIDE WITH THE REST HAS 1.00 LENGTH FLAP.
STYLE DESIGNATOR	NON-CIRCULAR W/BOLT HOLES

Click here to Register for Free 30-day Trial