5365-01-029-8790, SPACER,PLATE

National Stock Number:
5365-01-029-8790

Federal Supply Class:
5365

National Item Identification Number:
010298790

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

3163644-1	59364	HONEYWELL INTERNATIONAL INC.
3163644-1	99193	HONEYWELL INTERNATIONAL INC.

Techincal Specification:

APERTURE DIAMETER	0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.414 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.414 INCHES NOMINAL
HOLE DIAMETER	0.215 INCHES MINIMUM AND 0.223 INCHES MAXIMUM
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH	0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH	0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.288 INCHES MINIMUM AND 0.298 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.288 INCHES MINIMUM AND 0.298 INCHES MAXIMUM
OVERALL LENGTH	1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM
OVERALL WIDTH	1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 6061
SPECIAL FEATURES	APERTURE COUNTERBORED ONE SIDE 1.475 IN. MIN,1.490 IN. MAX DIA,0.040 IN. MIN,0.050 IN. MAX DEPTH
STYLE DESIGNATOR	NON-CIRCULAR W/BOLT HOLES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625,TY 2,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	ANODIZE

Click here to Register for Free 30-day Trial