|
|
|
National Stock Number:
5365-01-017-5601
Federal Supply Class:
5365
National Item Identification Number:
010175601
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 742386CL4 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.398 INCHES MINIMUM AND 0.402 INCHES MAXIMUM | | FSC APPLICATION DATA | BEARING,SCAVENGE PUMP | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM | | LARGEST BOLT HOLE DIAMETER | 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM | | OUTSIDE CORNER RADIUS | 0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM | | OVERALL LENGTH | 1.010 INCHES MINIMUM AND 1.030 INCHES MAXIMUM | | OVERALL WIDTH | 0.610 INCHES MINIMUM AND 0.630 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 8740 | | SMALLEST BOLT HOLE DIAMETER | 0.256 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
|
|