|
|
|
National Stock Number:
5365-01-016-6748
Federal Supply Class:
5365
National Item Identification Number:
010166748
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 65160-00048-107 | 78286 | SIKORSKY AIRCRAFT CORPORATION |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 8 | | HOLE DIAMETER | 0.560 INCHES NOMINAL | | OVERALL LENGTH | 7.900 INCHES NOMINAL | | OVERALL WIDTH | 4.700 INCHES NOMINAL | | SPECIAL FEATURES | THREE HOLES LOCATED BOTH SIDES,0.750 IN. FROM CENTERLINE,0.625,4.625 AND 6.625 IN. FROM SQUARE END,ONE HOLE LOCATED BOTH SIDES 0.937 IN. FROM CENTERLINE AND 2.625 IN. FROM SQUARE END,PLATE TAPERED AT 4.200 IN. LG POINT FROM 4.700 TO 3.340 IN. W,TAPERED END CORNERS ROUNDED 1.130 IN. RADIUS |
|
|