|
|
|
National Stock Number:
5365-01-016-6746
Federal Supply Class:
5365
National Item Identification Number:
010166746
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 65160-00048-108 | 78286 | SIKORSKY AIRCRAFT CORPORATION |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 8 | | CONSTRUCTION | ONE-PIECE | | HOLE DIAMETER | 0.560 INCHES NOMINAL | | OVERALL LENGTH | 7.900 INCHES NOMINAL | | OVERALL WIDTH | 4.700 INCHES NOMINAL | | SPECIAL FEATURES | THREE HOLES LOCATED BOTH SIDES AND 0.750 IN. FROM CENTERLINE MEASURED0.625,4.625 AND 6.625 IN. FROM SQUAREEND,ONE HOLE LOCATED BOTH SIDES AND 0.937 IN. FROM CENTERLINE MEASURED 2.625 IN. FROM SQUARE END,PLATE TAPERED AT 4.200 IN. LG POINT FROM 4.700 TO 3.430 IN. W,TAPERED END CORNERS ROUNDED 1.130 IN. RADIUS |
|
|