|
|
|
National Stock Number:
5365-01-015-1832
Federal Supply Class:
5365
National Item Identification Number:
010151832
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| RA11784-3 | 51663 | HYDRO-AIRE AEROSPACE CORP. |
|
Techincal Specification:
| APERTURE DIAMETER | 2.391 INCHES NOMINAL | | BOLT CIRCLE DIAMETER | 2.687 INCHES NOMINAL | | BOLT HOLE QUANTITY | 3 | | CONSTRUCTION | ONE-PIECE | | HOLE DIAMETER | 0.172 INCHES NOMINAL | | OUTSIDE CORNER INVERTED RADIUS | 0.125 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 0.188 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/1 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/2 FED SPEC 2ND MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 1100 OR ALUMINUM ALLOY 3003 | | SIDE RADIUS FROM GASKET CENTER | 1.375 INCHES NOMINAL |
|
|