|
|
|
National Stock Number:
5365-01-014-4613
Federal Supply Class:
5365
National Item Identification Number:
010144613
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 245001-2 | 09205 | LOCKHEED MARTIN CORP ELECTRONICS AND MISSILES DIV | | AIRWORTHY CERTIFICATED ITEM | KN999 | DE&S AIRWORTHINESS TEAM (DAT) | | CA18029-2 | 29372 | HOWMET GLOBAL FASTENING SYSTEMS INC. | | CA18029-2 | KCUF0 | MINISTRY OF DEFENCE MILITARY FLYING TRAINING SYSTEM IPT MFTS IPT | | GS540D2 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| APERTURE WIDTH | 0.310 INCHES NOMINAL | | APERTURE LENGTH | 0.310 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.682 INCHES MINIMUM AND 0.692 INCHES MAXIMUM | | HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM | | OVERALL LENGTH | 0.930 INCHES NOMINAL | | OVERALL WIDTH | 0.430 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | SPECIAL FEATURES | APERTURE ROUND;AIRWORTHY CERTIFICATED ITEM SUPPLIED WITH CERTIFICATE OF CONFORMAITY DOCUMENTATION | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY AIRWORTHY CERTIFICATED ITEM SUPPLIED WITH CERTIFICATE OF CONFORMITY DOCUMENTATION | | STYLE DESIGNATOR | NON-CIRCULAR W/O RADIUS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE |
|
|