5365-01-011-5890 SHIM Index 5365-01-011-5892 SHIM

National Stock Number:
5365-01-011-5891

Federal Supply Class:
5365

National Item Identification Number:
010115891

Description:
SHIM

Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.


Manufacturer Information:
742386CL852661RTX CORPORATION
742386CL877445RTX CORPORATION


Techincal Specification:
BOLT HOLE QUANTITY2
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH0.398 INCHES MINIMUM AND 0.402 INCHES MAXIMUM
CONSTRUCTIONONE-PIECE
CRITICALITY CODE JUSTIFICATIONFEAT
FSC APPLICATION DATABEARING,SCAVENGE PUMP
HARDNESS RATING32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
LARGEST BOLT HOLE DIAMETER0.398 INCHES MINIMUM AND 0.402 INCHES MAXIMUM
OUTSIDE CORNER RADIUS0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM
OVERALL LENGTH1.010 INCHES MINIMUM AND 1.030 INCHES MAXIMUM
OVERALL WIDTH0.610 INCHES MINIMUM AND 0.630 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6322 ASSN STD SINGLE MATERIAL RESPONSE
MATERIALSTEEL
SMALLEST BOLT HOLE DIAMETER0.256 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
SPECIAL FEATURESCRITICAL FEATURES, TOLERANCES, FIT RESTRICTIONS, MATERIAL PROPERTIES ANDMANUFACTURING PROCESS. FAILURE COULD RESULT IN LOSS OR SUBSTANTIAL DAMAGE TO WEAPON SYSTEM, DEATH OR SERIOUS INJURY.


Click here to Register for Free 30-day Trial