|
|
|
National Stock Number:
5365-01-010-0139
Federal Supply Class:
5365
National Item Identification Number:
010100139
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 011315 | D0078 | DIEHL DEFENCE GMBH & CO. KG | | 1719790 | 56232 | LOCKHEED MARTIN CORPORATION | | NO PRIMARY REF 01-010-0139 | IREF0 | THIS NCAGE IS USED TO INFORM THAT THE DESIGN CONTROL AUTHORITY CANNOT BEESTABLISHED OR THE ITEM OF SUPPLY IS NO LONGER M |
|
Techincal Specification:
| APERTURE DIAMETER | 0.128 INCHES MINIMUM AND 0.136 INCHES MAXIMUM | | CONSTRUCTION | ONE-PIECE | | OUTSIDE DIAMETER | 0.248 INCHES MINIMUM AND 0.258 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING | | SPECIAL FEATURES | 2 NOV. 00 ITEM REVIEW UNDER GIRDER PROJECT. NATO COUNTRY NON-CONCUR CANCELLECTION ACTION | | SURFACE TREATMENT | PASSIVATE |
|
|