5365-00-997-8852 SHIM Index 1680-00-997-8854 SEAT SHIM,PILOT SUP

National Stock Number:
5365-00-997-8853

Federal Supply Class:
5365

National Item Identification Number:
009978853

Description:
SHIM

Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.


Manufacturer Information:
209-030-252-297499BELL TEXTRON INC


Techincal Specification:
CONSTRUCTIONLAMINATED
FEATURES PROVIDEDNONSEPARABLE
LAMINATION QUANTITY31
LAMINATION THICKNESS0.003 INCHES NOMINAL
OVERALL LENGTH5.380 INCHES NOMINAL
OVERALL WIDTH6.245 INCHES NOMINAL
SPECIAL FEATURESSHIM IS L SHAPED LOCATED IN 1ST QUADRANT,1.250 IN. W ALONG LG,1.500 IN. W ON VERTICAL LG,VERTICAL LG AT 15DEG ANGLE MEASURED 1.560 IN. ABOVE BASE,ONE JOGGLE ON HORIZONTAL LEG 0.050 IN. HIGH LOCATED 1.080 IN. FROM RIGHT END


Click here to Register for Free 30-day Trial