|
|
|
National Stock Number:
5365-00-993-9523
Federal Supply Class:
5365
National Item Identification Number:
009939523
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 40S400D075-160 | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES, INC. | | 40S400D075-160 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | MILS22499 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CONSTRUCTION | LAMINATED | | FEATURES PROVIDED | SEPARABLE | | LAMINATION THICKNESS | 0.003 INCHES NOMINAL | | OVERALL LENGTH | 1.580 INCHES MINIMUM AND 1.620 INCHES MAXIMUM | | OVERALL WIDTH | 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8,H34 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 5052 | | NONDEFINITIVE SPEC/STD DATA | 1 COMPOSITION AND 1 TYPE AND 1 CLASS | | SPECIAL FEATURES | ROUNDED CORNERS 0.250 IN. RADIUS |
|
|