|
|
|
National Stock Number:
5365-00-990-2766
Federal Supply Class:
5365
National Item Identification Number:
009902766
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 09167611 | F6180 | ALCATEL-LUCENT INTERNATIONAL | | 09167611 | F6204 | ALCATEL TELSPACE | | 09167611 | I9002 | BUREAU DE GESTION OTAN HAWK | | 9167611 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| APERTURE WIDTH | 0.402 INCHES NOMINAL | | APERTURE LENGTH | 0.902 INCHES NOMINAL | | BOLT HOLE QUANTITY | 2 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.222 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.284 INCHES NOMINAL | | CONSTRUCTION | ONE-PIECE | | FSC APPLICATION DATA | RADAR SET,GUIDED MISSILE | | HOLE DIAMETER | 0.177 INCHES NOMINAL | | INSIDE CORNER RADIUS | 0.063 INCHES NOMINAL | | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.185 INCHES NOMINAL | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.171 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 1.063 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.171 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.185 INCHES NOMINAL | | OVERALL LENGTH | 1.625 INCHES NOMINAL | | OVERALL WIDTH | 1.625 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-C-895,COND 1/2 HARD MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | COPPER ALLOY | | SURFACE TREATMENT | RHODIUM |
|
|