|
|
|
National Stock Number:
5365-00-835-1848
Federal Supply Class:
5365
National Item Identification Number:
008351848
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 13213E1111-383 | 97403 | CECOM LR CENTER | | 13213E5415 | 97403 | CECOM LR CENTER | | 5415-000 | 01634 | ALUMINUM CO OF AMERICA |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 3 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.250 INCHES NOMINAL | | CONSTRUCTION | LAMINATED | | FEATURES PROVIDED | SEPARABLE | | HOLE DIAMETER | 0.499 INCHES MINIMUM AND 0.505 INCHES MAXIMUM | | LAMINATION QUANTITY | 16 | | LAMINATION THICKNESS | 0.002 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 0.620 INCHES NOMINAL | | OVERALL LENGTH | 5.750 INCHES NOMINAL | | OVERALL WIDTH | 1.120 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 | | SPECIAL FEATURES | OUTSIDE CORNER RADIUS ON TWO CORNERS ONLY | | STYLE DESIGNATOR | NON-CIRCULAR W/CORNER RADIUS |
|
|