|
|
|
National Stock Number:
5365-00-833-7620
Federal Supply Class:
5365
National Item Identification Number:
008337620
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 8337620 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.440 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.820 INCHES NOMINAL | | HOLE DIAMETER | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.375 INCHES NOMINAL | | OVERALL LENGTH | 1.375 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-637,COMP 1010 TO 1020 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SPECIAL FEATURES | FIRST HOLE 0.250 IN. FROM OUTSIDE EDGE TO BOLT HOLE CENTER ALONG WIDTH | | STYLE DESIGNATOR | SQUARE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-E-489,WHITE FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ENAMEL |
|
|