|
|
|
National Stock Number:
5365-00-809-1356
Federal Supply Class:
5365
National Item Identification Number:
008091356
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 283430-1 | 33068 | TRIUMPH ACTUATION SYSTEMS - CONNECTICUT, LLC |
|
Techincal Specification:
| APERTURE DIAMETER | 0.0635 INCHES MINIMUM AND 0.0640 INCHES MAXIMUM | | CRITICALITY CODE JUSTIFICATION | ABVL AND ADPW | | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM AND 63.0 ROCKWELL C MAXIMUM | | OUTSIDE CORNER RADIUS | 0.1717 INCHES NOMINAL | | OVERALL LENGTH | 0.290 INCHES NOMINAL | | OVERALL WIDTH | 0.290 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S763 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 440C | | SPECIAL FEATURES | A RAISED AREA 0.100 IN. W AND 0.010 IN. H ON END RUNNING FROM CENTER TO ALL FOUR SIDES | | STYLE DESIGNATOR | NON-CIRCULAR W/O BOLT HOLES |
|
|