5905-00-808-7410 RESISTOR,FIXED,FILM Index 5965-00-808-7412 HEADSET,ELECTRICAL

National Stock Number:
5365-00-808-7411

Federal Supply Class:
5365

National Item Identification Number:
008087411

Description:
SHIM

Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.


Manufacturer Information:
1162113419207U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
2803N21723D6E9MERITOR INDUSTRIAL PRODUCTS, LLC
2803N217278500MERITOR HEAVY VEHICLE SYSTEMS, LLC


Techincal Specification:
CONSTRUCTIONONE-PIECE
HARDNESS RATING90.0 ROCKWELL C MINIMUM
OUTSIDE DIAMETER1.125 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-698,COLD ROLLED FED SPEC SINGLE MATERIAL RESPONSE
MATERIALSTEEL


Click here to Register for Free 30-day Trial