|
|
|
National Stock Number:
5365-00-807-5884
Federal Supply Class:
5365
National Item Identification Number:
008075884
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| S8154-150C005 | 0ZWK8 | MOOG INC. | | S8154-150C005 | 59364 | HONEYWELL INTERNATIONAL INC. | | S8154-150C005 | 70210 | HONEYWELL INTERNATIONAL INC. | | S8154-150C005 | 72599 | ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO | | S8154-150C005 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 0.626 INCHES MINIMUM AND 0.636 INCHES MAXIMUM | | CONSTRUCTION | ONE-PIECE | | OUTSIDE DIAMETER | 0.725 INCHES MINIMUM AND 0.735 INCHES MAXIMUM | | OVERALL THICKNESS | 0.005 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059,COND 1/4,1/2,OR FULL HARD MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5059,CON 1/4 HARD MIL SPEC 2ND MATERIAL RESPONSE OR ASTM A582 ASSN STD 3RD MATERIAL RESPONSE | | MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 | | STYLE DESIGNATOR | CIRCULAR |
|
|