|
|
|
National Stock Number:
5365-00-799-3431
Federal Supply Class:
5365
National Item Identification Number:
007993431
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 209-030-513-17 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.650 INCHES MINIMUM AND 1.710 INCHES MAXIMUM | | HOLE DIAMETER | 0.184 INCHES MINIMUM AND 0.190 INCHES MAXIMUM | | OUTSIDE CORNER RADIUS | 0.180 INCHES MINIMUM AND 0.240 INCHES MAXIMUM | | OVERALL LENGTH | 2.150 INCHES MINIMUM AND 2.210 INCHES MAXIMUM | | OVERALL WIDTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FW4182 MFR REF SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE |
|
|