|
|
|
National Stock Number:
5365-00-799-0466
Federal Supply Class:
5365
National Item Identification Number:
007990466
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 540-011-426-1 | 80070 | LOCKHEED MARTIN CORPORATION | | 540-011-426-1 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| BEARING SURFACE WIDTH | 0.563 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | CONSTRUCTION | LAMINATED | | FEATURES PROVIDED | SEPARABLE | | FSC APPLICATION DATA | SWASHPLATE,HELICOPTER | | HOLE DIAMETER | 0.280 INCHES MINIMUM AND 0.287 INCHES MAXIMUM | | LAMINATION THICKNESS | 0.002 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4012 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM | | SIDE RADIUS FROM GASKET CENTER | 4.438 INCHES NOMINAL |
|
|