5365-00-785-3622, SHIM

National Stock Number:
5365-00-785-3622

Federal Supply Class:
5365

National Item Identification Number:
007853622

Description:
SHIM

Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.

Manufacturer Information:

204-010-789-001	97499	BELL TEXTRON INC
204-010-789-1	97499	BELL TEXTRON INC

Techincal Specification:

APERTURE DIAMETER	1.712 INCHES MINIMUM AND 1.732 INCHES MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.546 INCHES MINIMUM AND 1.566 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.870 INCHES MINIMUM AND 1.890 INCHES MAXIMUM
CONSTRUCTION	LAMINATED
FEATURES PROVIDED	NONSEPARABLE
FSC APPLICATION DATA	TAIL ROTOR TRUNNION,HELICOPTER
HOLE DIAMETER	0.256 INCHES MINIMUM AND 0.263 INCHES MAXIMUM
LAMINATION QUANTITY	2
LAMINATION THICKNESS	0.002 INCHES NOMINAL
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.312 INCHES MINIMUM AND 0.332 INCHES MAXIMUM
OVERALL LENGTH	2.200 INCHES NOMINAL
OVERALL WIDTH	2.390 INCHES MINIMUM AND 2.410 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-22499,CL 1 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL	COPPER ALLOY 260
STYLE DESIGNATOR	NON-CIRCULAR W/BOLT HOLES

Click here to Register for Free 30-day Trial