|
|
|
National Stock Number:
5365-00-779-1028
Federal Supply Class:
5365
National Item Identification Number:
007791028
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 40A30023-5 | 11599 | TRIUMPH ENGINE CONTROL SYSTEMS LLC |
|
Techincal Specification:
| CONSTRUCTION | ONE-PIECE | | OVERALL LENGTH | 0.955 INCHES MINIMUM AND 0.965 INCHES MAXIMUM | | OVERALL WIDTH | 0.610 INCHES MINIMUM AND 0.630 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5519 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 301 | | SPECIAL FEATURES | ONE NOTCH IN THE END 0.247 IN. MIN AND 0.253 IN. MAX W.0.955 IN. MAX AND 0.965 IN. MAX DEEP | | STYLE DESIGNATOR | RECTANGULAR |
|
|