|
|
|
National Stock Number:
5365-00-777-7342
Federal Supply Class:
5365
National Item Identification Number:
007777342
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 5365007777342 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5365007777342 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 8756589 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 8756589 | 22888 | FMC CORP | | 8756589 | T0720 | FNSS SAVUNMA SISTEMLERI ANONIM SIRKETI |
|
Techincal Specification:
| APERTURE DIAMETER | 5.625 INCHES NOMINAL | | BOLT CIRCLE DIAMETER | 6.7500 INCHES NOMINAL | | BOLT HOLE QUANTITY | 6 | | CONSTRUCTION | LAMINATED | | FEATURES PROVIDED | NONSEPARABLE | | HOLE DIAMETER | 0.547 INCHES MINIMUM AND 0.578 INCHES MAXIMUM | | LAMINATION QUANTITY | 1 AND 21 | | LAMINATION THICKNESS | 0.003 INCHES NOMINAL AND 0.063 INCHES MAXIMUM | | OUTSIDE DIAMETER | 7.813 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/1,H19 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/8,H19 OR H39 FED SPEC 2ND MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 1100 OR ALUMINUM ALLOY 5052 | | SPECIAL FEATURES | ONE POSITIONING HOLE | | STYLE DESIGNATOR | CIRCULAR |
|
|