|
|
|
National Stock Number:
5365-00-706-2895
Federal Supply Class:
5365
National Item Identification Number:
007062895
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 326864 | 03956 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 326864 | 37695 | RAYTHEON COMPANY | | 326864 | 56232 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 5 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.615 INCHES MINIMUM AND 1.635 INCHES MAXIMUM | | CONSTRUCTION | ONE-PIECE | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.242 INCHES MINIMUM AND 0.262 INCHES MAXIMUM | | OVERALL LENGTH | 2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-318 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 5052 | | SPECIAL FEATURES | SHIM SPECIAL SHAPED,0.438 IN. ONE END 0.875 IN. OTHER END; SAME END CHAMFERED 0.156 IN. ON ONE SIDE; THREE HOLES 0.247 IN. MIN AND 0.255 IN. MAX; TWO HOLES 0.201 IN. MIN AND 0.209 IN. MAX ON SAME CENTERLINE AS ADVJ SPACED 0.812 IN. APART | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE |
|
|