1670-00-704-7419 HARNESS,PERSONNEL PARACHUTE,TORS Index 5365-00-704-7429 SHIM

National Stock Number:
5365-00-704-7428

Federal Supply Class:
5365

National Item Identification Number:
007047428

Description:
SHIM

Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.


Manufacturer Information:
331D0405643BARBER-GREENE CO
331D040MKW7MINNPAR, LLC
K-2060560038THE TIMKEN CORPORATION


Techincal Specification:
APERTURE DIAMETER1.406 INCHES MINIMUM AND 1.416 INCHES MAXIMUM
BOLT CIRCLE DIAMETER1.870 INCHES MINIMUM AND 1.880 INCHES MAXIMUM
BOLT HOLE QUANTITY4
CONSTRUCTIONONE-PIECE
HOLE DIAMETER0.281 INCHES NOMINAL
OUTSIDE CORNER INVERTED RADIUS0.125 INCHES NOMINAL
OUTSIDE CORNER RADIUS0.250 INCHES NOMINAL
OVERALL WIDTH2.370 INCHES MINIMUM AND 2.380 INCHES MAXIMUM
MATERIALALUMINUM ALLOY
SIDE RADIUS FROM GASKET CENTER0.935 INCHES MINIMUM AND 0.940 INCHES MAXIMUM
STYLE DESIGNATORNON-CIRCULAR W/APERTURE


Click here to Register for Free 30-day Trial