|
|
|
National Stock Number:
5365-00-660-1396
Federal Supply Class:
5365
National Item Identification Number:
006601396
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 9065852 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| APERTURE WIDTH | 0.304 INCHES MINIMUM AND 0.401 INCHES MAXIMUM | | APERTURE LENGTH | 0.899 INCHES MINIMUM AND 0.901 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 6 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.302 INCHES MINIMUM AND 1.304 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.276 INCHES MINIMUM AND 1.284 INCHES MAXIMUM | | FSC APPLICATION DATA | TEST SET GUIDED MISSILE | | HOLE DIAMETER | 0.170 INCHES MINIMUM AND 0.173 INCHES MAXIMUM | | INSIDE CORNER RADIUS | 0.031 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 0.063 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.1705 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.191 INCHES NOMINAL | | OVERALL LENGTH | 3.000 INCHES NOMINAL | | OVERALL WIDTH | 1.625 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-613,1/2H FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | COPPER ALLOY 268 | | PRECIOUS MATERIAL AND LOCATION | OVERALL SURFACE RHODIUM | | PRECIOUS MATERIAL | RHODIUM | | SURFACE TREATMENT | RHODIUM |
|
|