|
|
|
National Stock Number:
5365-00-652-3451
Federal Supply Class:
5365
National Item Identification Number:
006523451
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 207048-1 | 70210 | HONEYWELL INTERNATIONAL INC. | | 207048-1 | 72599 | ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO |
|
Techincal Specification:
| APERTURE DIAMETER | 1.600 INCHES MINIMUM AND 1.620 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 2.000 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | CONSTRUCTION | ONE-PIECE | | FSC APPLICATION DATA | GAS TURBINE COMPRESSOR,NON AIRCRAFT | | HOLE DIAMETER | 0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM | | OUTSIDE CORNER INVERTED RADIUS | 0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM | | OUTSIDE CORNER RADIUS | 0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM | | OVERALL WIDTH | 2.340 INCHES MINIMUM AND 2.420 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | SIDE RADIUS FROM GASKET CENTER | 0.930 INCHES MINIMUM AND 0.950 INCHES MAXIMUM | | SURFACE TREATMENT | PASSIVATE |
|
|