|
|
|
National Stock Number:
5365-00-537-3605
Federal Supply Class:
5365
National Item Identification Number:
005373605
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 790-1367-001 | 13499 | ROCKWELL COLLINS, INC. |
|
Techincal Specification:
| CONSTRUCTION | ONE-PIECE | | HARDNESS RATING | 76.0 ROCKWELL B MINIMUM AND 86.0 ROCKWELL B MAXIMUM | | OVERALL LENGTH | 0.880 INCHES NOMINAL | | OVERALL WIDTH | 0.513 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-613,TEMP H FED SPEC ALL MATERIAL RESPONSES | | MATERIAL | COPPER ALLOY 260 OR COPPER ALLOY 268 | | SPECIAL FEATURES | TWO 0.091 IN. NOMINAL DIA HOLES 0.300 IN. C TO C LOCATE ON A LINE 0.325 IN. FROM BOTTOM AND 0.210 FROM LEFT EDGE | | STYLE DESIGNATOR | RECTANGULAR |
|
|