|
|
|
National Stock Number:
5365-00-536-9990
Federal Supply Class:
5365
National Item Identification Number:
005369990
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 14984-1 | 98889 | AEROCONTROLEX GROUP, INC. | | 200413191-01 | 98752 | WARNER ROBINS AIR LOGISTICS CENTER |
|
Techincal Specification:
| APERTURE DIAMETER | 1.328 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.250 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.250 INCHES NOMINAL | | CONSTRUCTION | ONE-PIECE | | HOLE DIAMETER | 0.195 INCHES MINIMUM AND 0.201 INCHES MAXIMUM | | OUTSIDE CORNER RADIUS | 0.25 INCHES NOMINAL | | OVERALL LENGTH | 1.75 INCHES NOMINAL | | OVERALL THICKNESS | 0.010 INCHES NOMINAL | | OVERALL WIDTH | 1.75 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A480 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A666 301/302 1/2 HARD THRU FULL HARD ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING OR STEEL COMP 301 OR STEEL COMP 302 | | SPECIAL FEATURES | ALONG THE TOP EDGE THERE IS A 0.78 WIDE AND 0.125 DEEP CUT OUT CENTERALLY LOCATED ALONG THE TOP EDGE | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SAE AMS-QQ-P-35 TYPE VI ASSN STD SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|