4720-00-533-3658 HOSE ASSEMBLY,NONMETALLIC Index 5340-00-533-3668 CLAMP,LOOP

National Stock Number:
5365-00-533-3663

Federal Supply Class:
5365

National Item Identification Number:
005333663

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.


Manufacturer Information:
193082416764GENERAL MOTORS CORP DELCO REMY DIV
19308241LW55BORGWARNER PDS (ANDERSON), L.L.C.
193082424617GENERAL MOTORS CORP
5305005333663A00AME.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
5305005333663SCY13E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
5365005333663A00AME.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE


Techincal Specification:
APERTURE DIAMETER1.265 INCHES MINIMUM AND 1.270 INCHES MAXIMUM
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM
HOLE DIAMETER0.184 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
OUTSIDE CORNER RADIUS1.031 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.188 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.188 INCHES NOMINAL
OVERALL LENGTH1.625 INCHES NOMINAL
OVERALL WIDTH1.625 INCHES NOMINAL
MATERIALSTEEL COMP 1213
STYLE DESIGNATORNON-CIRCULAR W/BOLT HOLES
SURFACE TREATMENTCADMIUM OR CHROMATE


Click here to Register for Free 30-day Trial