|
|
|
National Stock Number:
5365-00-530-6708
Federal Supply Class:
5365
National Item Identification Number:
005306708
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 214-040-318 | 97499 | BELL TEXTRON INC | | 214-040-318-001 | 97499 | BELL TEXTRON INC | | 214-040-318-1 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| APERTURE DIAMETER | 5.856 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18729,CONDITION N MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4130 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PLATE,SHIM-INTERMEDIATE GEARBOX,TAIL ROTOR DRIVE | | PROPRIETARY CHARACTERISTICS | PACS | | MOUNTING HOLE QUANTITY | 13 | | MOUNTING HOLE TYPE | THRU HOLE | | OVERALL THICKNESS | 0.090 INCHES NOMINAL | | SPECIAL FEATURES | PLATE HAS 13 HOLES TOTAL;9 HOLES ARE 0.347/0.351 INCHES IN DIAMETER,3 HOLES ARE 0.135/0.141 INCHES IN DIAMETER AND 1 HOLE IS 0.452/0.459 INCHES IN DIAMETER;THIS ITEM IS OPPOSITE TO ITEM 214-040-318-3,CAGE 97499 |
|
|