|
|
|
National Stock Number:
5365-00-158-1470
Federal Supply Class:
5365
National Item Identification Number:
001581470
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 657248CL4 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.125 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.060 INCHES NOMINAL | | CONSTRUCTION | ONE-PIECE | | HOLE DIAMETER | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM | | OUTSIDE CORNER RADIUS | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM | | OVERALL LENGTH | 1.610 INCHES MINIMUM AND 1.640 INCHES MAXIMUM | | OVERALL WIDTH | 1.545 INCHES MINIMUM AND 1.575 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5516 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5519 ASSN STD 2ND MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 OR STEEL COMP 301 | | SPECIAL FEATURES | 0.375 IN. RADIUS CENTERED ALONG WIDTH DIMENSIONS |
|
|