|
|
|
National Stock Number:
5340-01-569-3371
Federal Supply Class:
5340
National Item Identification Number:
015693371
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 241 0NV929712-1M3308-001 | 0NV92 | COMPRO COMPUTER SERVICES, INC. | | 9712-1M3308-001 | 0NV92 | COMPRO COMPUTER SERVICES, INC. |
|
Techincal Specification:
| CENTER SECTION WIDTH | 0.547 INCHES NOMINAL | | CENTER SECTION HEIGHT | 1.800 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.050 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG LENGTH | 0.517 INCHES NOMINAL | | FIRST LEG THICKNESS | 0.090 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | HINGE,EMERGENCY COVER,TRIM CONTROL PANEL | | MATERIAL | ALUMINUM ALLOY 6061 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG THICKNESS | 0.090 INCHES NOMINAL | | SECOND LEG LENGTH | 0.517 INCHES NOMINAL | | SPECIAL FEATURES | MAIN SURFACE HAS 2 EACH 0.120 INCH DIAMETER THRU HOLES LOCATED CENTEREDAT 1.300 INCHES APART AND 0.387 INCHESFROM FRONT EDGE;LEGS HAVE ONE THRU HOLE EACH OF 0.095 INCH DIAMETER LOCATED 0.145 INCHES FROM BOTTOM EDGE AND 0.093 INCHES FROM REAR EDGE;LEGS ALSO HAVETWO ADDITIONAL HOLES EACH, COUNTERBORED AT 90 DEGREES LOCATED AT 0.338 INCHES FROM BACK AND BOTTOM EDGES | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625E,TY II,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE |
|
|