| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 8.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 8.0 MILLIMETERS MINIMUM AND 8.3 MILLIMETERS MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 24.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 10.0 MILLIMETERS NOMINAL |
| FIRST LEG WIDTH | 38.0 MILLIMETERS MINIMUM AND 42.0 MILLIMETERS MAXIMUM |
| FIRST LEG LENGTH | 21.0 MILLIMETERS MINIMUM AND 25.0 MILLIMETERS MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.075 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET,MOUNTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A366 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 1009 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 9.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 20.0 MILLIMETERS NOMINAL |
| SECOND LEG LENGTH | 37.0 MILLIMETERS MINIMUM AND 41.0 MILLIMETERS MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG THICKNESS | 0.075 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 6.6 MILLIMETERS MINIMUM AND 6.9 MILLIMETERS MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM B633,TYPE 2. FE/ZNB ASSN STD ALL TREATMENT RESPONSES |
| SURFACE TREATMENT | ZINC AND CHROMATE |