| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 15.0 MILLIMETERS NOMINAL |
| FIRST LEG ANGLE | 5.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 90.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE DIAMETER | 9.0 MILLIMETERS NOMINAL |
| FIRST LEG LENGTH | 120.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 10.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG THICKNESS | 5.0 MILLIMETERS NOMINAL |
| FIRST LEG WIDTH | 24.0 MILLIMETERS NOMINAL |
| FIRST LEG STYLE | SQUARE |
| MATERIAL | STEEL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | RETAINER RIGHT SIDE, STEERING SHAFT |
| PROPRIETARY CHARACTERISTICS | PACS |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 50.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 30.0 MILLIMETERS MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 80.0 MILLIMETERS NOMINAL |
| SECOND LEG SLOT OFFSET ANGLE | 0.0 DEGREES NOMINAL |
| SECOND LEG SLOT WIDTH | 20.0 MILLIMETERS NOMINAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 5.0 MILLIMETERS NOMINAL |
| SECOND LEG LENGTH | 120.0 MILLIMETERS NOMINAL |
| SECOND LEG WIDTH | 70.0 MILLIMETERS NOMINAL |
| SPECIAL FEATURES | SLOT HAS END RADIUS OF 22.0 MM, SEE DRAWING FOR DETAILS |
| STYLE DESIGNATOR | ANGLE |