| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 12.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 130.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 10.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 12.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 25.0 MILLIMETERS NOMINAL |
| FIRST LEG WIDTH | 50.0 MILLIMETERS NOMINAL |
| FIRST LEG LENGTH | 170.0 MILLIMETERS NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.135 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A1008/A1008M SHEET C, OLD-ROLLED. 0.1345 INCH (10 GA) ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 30.0 MILLIMETERS NOMINAL |
| SECOND LEG LENGTH | 25.0 MILLIMETERS NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 10.0 MILLIMETERS NOMINAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.135 INCHES NOMINAL |
| SECOND LEG WIDTH | 50.0 MILLIMETERS NOMINAL |
| SPECIAL FEATURES | FINISH IAW 12420325 METHOD 1 OR 4 |
| STYLE DESIGNATOR | ANGLE |