SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
SECOND LEG STYLE | CHAMFERED ENDS |
SECOND LEG THICKNESS | 0.075 INCHES NOMINAL |
SECOND LEG WIDTH | 158.0 MILLIMETERS MINIMUM AND 162.0 MILLIMETERS MAXIMUM |
STYLE DESIGNATOR | ANGLE |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 22.0 MILLIMETERS NOMINAL |
FIRST LEG ANGLE | 4.0 DEGREES MINIMUM AND 8.0 DEGREES MAXIMUM |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 120.0 MILLIMETERS NOMINAL |
FIRST LEG HOLE DIAMETER | 6.5 MILLIMETERS MINIMUM AND 7.1 MILLIMETERS MAXIMUM |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 20.0 MILLIMETERS NOMINAL |
FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
FIRST LEG WIDTH | 160.0 MILLIMETERS NOMINAL |
FIRST LEG STYLE | SQUARE |
FIRST LEG THICKNESS | 0.075 INCHES NOMINAL |
MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A569 OR ASTM A607 OR ASTM A366 ASSN STD SINGLE MATERIAL RESPONSE |
MATERIAL | STEEL |
PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, SIDE MARKER |
PROPRIETARY CHARACTERISTICS | PACS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 20.6 MAJOR INCHES |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 98.4 MILLIMETERS NOMINAL |
SECOND LEG END WIDTH | 135.0 MILLIMETERS NOMINAL |
SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
SECOND LEG HOLE DIAMETER | 7.2 MILLIMETERS MINIMUM AND 7.8 MILLIMETERS MAXIMUM |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 23.0 MILLIMETERS MINIMUM AND 27.0 MILLIMETERS MAXIMUM |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 29.8 MILLIMETERS MINIMUM AND 31.8 MILLIMETERS MAXIMUM |
SECOND LEG LENGTH | 88.0 MILLIMETERS MINIMUM AND 92.0 MILLIMETERS MAXIMUM |