|
|
|
National Stock Number:
5340-01-563-6257
Federal Supply Class:
5340
National Item Identification Number:
015636257
Description:
HANDLE,BAIL
Detail:
An item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
|
Manufacturer Information:
| H975SSW2SS | 1RRL5 | NIELSEN HARDWARE CORPORATION | | H975SSW2SS | 98003 | NIELSEN HARDWARE CORP | | H975SSW2SS-M | 1RRL5 | NIELSEN HARDWARE CORPORATION | | H975SSW2SS-M | 98003 | NIELSEN HARDWARE CORP |
|
Techincal Specification:
| HANDLE CLEARANCE | 2.750 INCHES NOMINAL | | HOLE DIAMETER | 0.199 INCHES NOMINAL | | INSIDE LENGTH | 4.130 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | (INAVY)LIFTING GRAPPLE, 180 DEGREE, HEAVY DUTY | | MATERIAL | STEEL CORROSION RESISTING HANDLE | | MOUNTING METHOD | MOUNTING PLATE | | MOUNTING PLATE STYLE | RAISED | | PLATE LENGTH | 4.750 INCHES NOMINAL | | PLATE WIDTH | 2.750 INCHES NOMINAL | | SPECIAL FEATURES | BAIL HANDLE ALTERED STYLE IN THAT INSTEAD OF BEING ROUNDED IT IS PENTAGON SHAPED, USING POINTED END FOR EITHER TIE DOWN OR HOIST LIFTING; HAS HEAVY DUTY STAINLESS STEEL RETURN SPRING, WITH 180 DEGREE MOTION; MOUNTING PLATE IS IRREGULARLY SHAPED IN THAT UPPER PORTION IS SMALLER IN WIDTH, 3.830 FOR A LENGTH COVERING THE HANDLE; AND THE LOWER PORTION OF THE PLATE IS FOR UNDER THE HANDLE TO THE END OF THE PLATE; UPPER PORTION HAS TWO MOUNTING HOLES CENTERED 3.000 INCHES APART AND 0.415 INCHES FROM OUTSIDE EDGES; BOTTOM PORTION HAS 3 MOUNTING HOLES SPACED 1.500 INCHES APART AND 0.875 INCHES FROM OUTSIDE EDGE | | STOCK DIAMETER | 0.310 INCHES NOMINAL | | STYLE DESIGNATOR | D |
|
|