| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 100.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 17.0 MILLIMETERS NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE DIAMETER | 9.4 MILLIMETERS NOMINAL |
| FIRST LEG LENGTH | 39.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 15.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 4.1 MILLIMETERS MINIMUM AND 4.5 MILLIMETERS MAXIMUM |
| FIRST LEG WIDTH | 134.0 MILLIMETERS NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, HYDRAULIC CONTROL VALVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | A1008, GRADE 45 MIN. ASSN STD 1ST MATERIAL RESPONSE OR A1011, GRADE 45 MIN. ASSN STD 2ND MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 1008 OR STEEL COMP 1011 |
| SECOND LEG LENGTH | 165.0 MILLIMETERS NOMINAL |
| SECOND LEG END WIDTH | 13.0 MILLIMETERS NOMINAL |
| SECOND LEG WIDTH | 134.0 MILLIMETERS NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE AND TAPERED |
| SECOND LEG THICKNESS | 4.1 MILLIMETERS MINIMUM AND 4.5 MILLIMETERS MAXIMUM |
| SPECIAL FEATURES | FOR SIZE AND PLACEMENT OF 3 HOLES ON SECOND LEG, SEE DWG. |
| STYLE DESIGNATOR | ANGLE |