| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.120 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.433 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.620 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.690 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.380 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.750 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.250 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, HOSE, O L |
| MATERIAL DOCUMENT AND CLASSIFICATION | H321 SPEC ASTM B209 ASSN STD 1ST MATERIAL RESPONSE OR H32 OR H116.H32 OR H116 ASTM B209 ASSN STD 2ND MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5056 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.880 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.690 INCHES NOMINAL |
| SECOND LEG CORNER RADIUS | 0.120 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.380 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 1.180 INCHES NOMINAL |
| SECOND LEG SLOT OFFSET ANGLE | 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM |
| SECOND LEG SLOT WIDTH | 0.433 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.380 INCHES NOMINAL |
| SPECIAL FEATURES | MATERIAL SHALL HAVE 24000 PSI MIN YS AND 40000 PSI MIN TS, PER DWG. |
| STYLE DESIGNATOR | ANGLE |