|
|
|
National Stock Number:
5340-01-525-1876
Federal Supply Class:
5340
National Item Identification Number:
015251876
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 5HM40331-219 | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| CENTER SECTION WIDTH | 2.000 INCHES NOMINAL | | CENTER SECTION HEIGHT | 1.000 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG LENGTH | 0.870 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG STYLE | CORNER RADIUS | | FIRST LEG THICKNESS | 0.094 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/4 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SUPPORTS, HARNESS-RH MAIN WEAPONSBAY ASSY OF | | PROPRIETARY CHARACTERISTICS | PACS | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES | | SECOND LEG HOLE DIAMETER | 0.204 INCHES MINIMUM AND 0.212 INCHES MAXIMUM | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | CORNER RADIUS | | SECOND LEG LENGTH | 0.960 INCHES NOMINAL | | SPECIAL FEATURES | NAME SUBMITTED FOR CATALOGING-BRACKET MOUNTING;REQUIRES 3 NUTS, P/N LK204F3;6 RIVETS P/N MS20426AD3-5 | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|