| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.245 INCHES MINIMUM AND 2.255 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| FIRST LEG LENGTH | 0.840 INCHES MINIMUM AND 0.900 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.310 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| FIRST LEG END WIDTH | 3.170 INCHES MINIMUM AND 3.350 INCHES MAXIMUM |
| FIRST LEG WIDTH | 3.470 INCHES MINIMUM AND 3.530 INCHES MAXIMUM |
| FIRST LEG SLOT LENGTH | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| FIRST LEG SLOT WIDTH | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B209 SHEET 502 TEMPTER H32 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| MOUNTING HOLE TYPE | COUNTERSUNK AND PLAIN |
| SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG LENGTH | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG END WIDTH | 3.170 INCHES MINIMUM AND 3.350 INCHES MAXIMUM |
| SECOND LEG HOLE DIAMETER | 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG THICKNESS | 0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
| SECOND LEG WIDTH | 3.470 INCHES MINIMUM AND 3.530 INCHES MAXIMUM |
| SPECIAL FEATURES | SECOND LEG HAS 8 COUNTERSUNK HOLES; BRACKET ANGLE RADIUS 0.060/0.120 |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-22750 FED SPEC SINGLE TREATMENT RESPONSE |