| LENGTH | 46.500 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B209 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING CONFIGURATION | RTHE TWO 3.875 IN DIAMETER ITEMS 1A HOLES ARE CENTERED 5 INCHES FROM THE BOTTOM OF THE SIDE PLATE, ARE 23.200 INCHES APART, AND ARE 11.610 INCHES FROM THE CENTER OF THE PLATE.SURROUNDING EACH 1A ITEM ARE FOUR HOLES (ITEM 1G) 0.406 INCHES IN DIAMETER THAT ARE IN A SQUARE PATTERN, EQUIDISTANT FROM EACH OTHER AND SURROUND ITEM 1A. ITEM 1B AND 1C ARE CENTERED ON A LINE THAT IS 1.500 INCHES FROM THE BOTTOM OF THE PLATE. ITEMS 1C ARE 13.250 INCHES FROM THE CENTER OF THE PLATE |
| MOUNTING HOLE DIAMETER | 0.297 INCHES NOMINAL FIFTH HOLE |
| MOUNTING HOLE DIAMETER | 0.297 INCHES NOMINAL THIRD HOLE |
| MOUNTING HOLE DIAMETER | 0.370 INCHES NOMINAL SEVENTH HOLE |
| MOUNTING HOLE DIAMETER | 0.406 INCHES NOMINAL FOURTH HOLE |
| MOUNTING HOLE DIAMETER | 0.406 INCHES NOMINAL SIXTH HOLE |
| MOUNTING HOLE DIAMETER | 0.164 INCHES NOMINAL EIGHTH HOLE |
| MOUNTING HOLE QUANTITY | 2 |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING HOLE QUANTITY | 8 |
| MOUNTING HOLE QUANTITY | 6 |
| MOUNTING HOLE DIAMETER | 0.781 INCHES NOMINAL NINTH HOLE |
| MOUNTING HOLE DIAMETER | 0.781 INCHES NOMINAL SECOND HOLE |
| MOUNTING HOLE DIAMETER | 1.030 INCHES NOMINAL FIRST HOLE |
| MOUNTING HOLE DIAMETER | 3.875 INCHES NOMINAL ALL HOLES |
| MOUNTING HOLE TYPE | THREADED OR UNTHREADED |
| SCREW THREAD SERIES DESIGNATOR | NC |
| SHAPE | IRREGULAR |
| SPECIAL FEATURES | DATA EXPORT RESTRICTED |
| WIDTH | 7.750 INCHES NOMINAL |
| THICKNESS | 0.500 INCHES NOMINAL |
| THREAD SIZE | 8-32 |